Bitubo Rear Shock XXZ31
Derived from the previous XXF, the Mono XXZ, is technologically at the top, presenting a totally renewed design bringing with it many technical innovations, such as the 4 adjustments: compression and Rebound at low and high speeds, with new settings designed to give the rider the best feeling possible.
Inside it is renewed with technical solutions that optimize the smoothness of moving parts, improve the damping coefficient and increase the stability at high temperatures, without forgetting the use of light materials to lower the overall weight. The Ø 14mm rod increases smoothness while the piston of Ø 30mm reduces the masses of fluid in motion for a faster response to stress, particular attention was dedicated to maximize the sensitivity and accuracy of adjustments. XXZ is designed to reduce inertia and ensure an immediate control of suspension oscillations.
TARGET is to give the rider precise control and increase maximum grip, as well as even tyre wear which is provided by the immediate damping force. This gives confidence to the rider in the corners even at extreme lean angles, during fast direction changes and under hard acceleration. At the same time it provides excellent stability of the rear, even under the most extreme braking, regardless of the track or surface condition.
ADJUSTABLE IN:
- Low speed compression 24 clicks
- High speed compression 20 clicks
- Rebound 24 clicks
- Hydraulic spring preload 10 mm = 20 clicks
- Length 8mm
- High speed rebound 20 clicks
INCLUDED IN THE PACK: Specific mounting instructions and setting chart.
